DS1922E-F5 thermochrons (high capacity) +15 to +140C (old stock)

DS1922E-F5 thermochrons (high capacity) +15 to +140C (old stock)

  • £51.63
Shipping calculated at checkout.

Only 0 left!

All in good working order but date code is Dec 2014.

Description

The DS1922E temperature logger iButtons® are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922E is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1922E is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. Accessories permit the DS1922E to be mounted on almost any object, including containers, pallets, and bags.

Special Features

  • Automatically Wakes up, Measures Temperature and Stores Values in 8kB of Datalog Memory in 8- or 16-Bit Format
  • Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution
  • Accuracy of ±1.5°C from +110°C to +140°C  (±7°C from +15°C to +110°C)
  • Sampling Rate from 2s up to 273hrs
  • Water Resistant or Waterproof if Placed Inside a DS9107 iButton Capsule (Exceeds Water Resistant 3 ATM Requirements)
  • Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
  • Programmable High and Low Trip Points for Temperature Alarms
  • Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
  • 512 Bytes of General-Purpose Plus 64 Bytes of Calibration Memory
  • Two-Level Password Protection of All Memory and Configuration Registers
  • Communicates to Host with a Single Digital Signal at up to 15.4kbps at Standard Speed or up to 125kbps in Overdrive Mode Using 1-Wire Protocol
  • Operating Range: 15 to +140°C
SKU: hc00472